Jesse – Page 2 – Jesse's RV-7A Build

Moving!

Building has stalled, so to speak. I’ve been in the process of moving from Arizona to Spokane, Washington. Once I

6/1/20 – Bent the HS-702 tabs to 6 degrees per plans. Clamped HS-00001 spar doublers to the HS-702’s as well

I had come upon the need to prepare my first ribs. One of the tasks is the ensure all flanges

5/30/20 – After waiting for about a week for additional Clecos, they arrived. I also receive a Scotch-Brite 6″ 7S

Using my newly made painting support screen, I was able to test out the HF HVLP gun with Steward Systems

While I’m waiting on some more Clecos to arrive, I’ve been getting familiar with my HF HVLP gun, as well

With my shop all setup, most of the needed tools acquired and parts ready to go, it was time to

This was a fun, challenging and educational project. This one, seemingly simple kit, finds a way to incorporate many of

The empennage/tail kit has arrived! Two big boxes, one larger than the other. I believe the total weight was listed

Big day! The tail kit has officially been ordered for an RV-7A. I did not spring for the electronic trim